Validation of an analytical method to quantify the permeation and penetration of flurbiprofen into human pharynx tissue

The aim of this investigation was to develop receiver and extraction fluids, and subsequently validate an analytical method to quantify the permeation and penetration of flurbiprofen into human pharynx tissue using a Franz diffusion cell. The solubility and stability of flurbiprofen in a suitable receiver fluid, and a suitable extraction method and fluid to recover and quantitate flurbiprofen from human pharynx tissue, were investigated using high‐performance liquid chromatography (HPLC). The potential interference of human pharynx tissue in the receiver fluid was also investigated. The HPLC analytical method was successfully validated according to current guidelines. The final receiver fluid demonstrated sufficient solubility and stability, and the extraction method and fluid resulted in >95% recovery of flurbiprofen following exposure to human pharynx tissue. The lower limit of quantitation of flurbiprofen was 0.045 μg/mL in both the receiver and extraction fluids. There was no interference of the human pharynx tissue with the HPLC method. This investigation validated an analytical method for quantitating flurbiprofen, and determined a suitable receiver fluid and extraction method and fluid, which can be used to investigate the permeation and penetration of flurbiprofen through human pharynx tissue using the Franz diffusion cell method.     

质子辐照硼硅酸盐玻璃盖片的物理效应分析

作为航天器电源系统的重要组成部分,太阳电池需要更高的转换效率和可靠性以及更长的使用寿命。通过在太阳电池表面覆盖抗辐照玻璃盖片,可以增强太阳电池对粒子辐射的防护,延长太阳电池的服役寿命,使航天器获得可靠的能源供应。硼硅酸盐玻璃就是一种理想的太阳电池玻璃盖片材料。采用蒙特卡罗方法,结合SRIM软件模拟研究质子辐照硼硅酸盐玻璃的损伤物理机理。基于粒子与物质相互作用的理论以及基本公式,通过分析不同入射能量的质子在硼硅酸盐玻璃中的阻止本领、电离能损、位移能损、空位的产生情况,对辐照损伤的物理机制进行研究。结果表明:能量为30~120 keV的质子辐照损伤主要发生在硼硅酸盐玻璃表面;质子沉积、空位分布等均为Bragg峰型分布;电离能损是能量损失的主要部分,随入射能量的增加而增大,导致电子的电离和激发;位移能损在玻璃内部随能量降低而增大,导致硼、氧和硅等空位缺陷的产生;电离效应和缺陷的产生是硼硅酸盐玻璃色心形成的重要原因。     

Wound Healing Attributes of Polyelectrolyte Multilayers Prepared with Multi‐l‐arginyl‐poly‐l‐aspartate Pairing with Hyaluronic Acid and γ‐Polyglutamic Acid

Biodegradable multi‐l ‐arginyl‐poly‐l ‐aspartate (MAPA), more commonly cyanophycin, prepared with recombinant Escherichia coli contains a polyaspartate backbone with lysine and arginine as side chains. Two assemblies of polyelectrolyte multilayers (PEMs) are fabricated at three different concentration ratios of insoluble MAPA (iMAPA) with hyaluronic acid (iMAPA/HA) and with γ‐polyglutamic acid (iMAPA/γ‐PGA), respectively, utilizing a layer‐by‐layer approach. Both films with iMAPA and its counterpart, HA or γ‐PGA, as the terminal layer are prepared to assess the effect on film roughness, cell growth, and cell migration. iMAPA incorporation is higher for a higher concentration of the anionic polymer due to better charge interaction. The iMAPA/HA films when compared to iMAPA/γ‐PGA multilayers show least roughness. The growth rates of L929 fibroblast cells on the PEMs are similar to those on glass substrate, with no supplementary effect of the terminal layer. However, the migration rates of L929 cells increase for all PEMs. γ‐PGA incorporated films impart 50% enhancement to the cell migration after 12 h of culture as compared to the untreated glass, and the smooth films containing HA display a maximum 82% improvement. The results present the use of iMAPA to construct a new layer‐by‐layer system of polyelectrolyte biopolymers with a potential application in wound dressing.     

Nido-carborane encapsulated by BODIPY zwitterionic polymers: Synthesis,photophysical properties and cell imaging

Carborane encapsulation was visualized by using fluoroboropyrrole (BODIPY) zwitterionic polymer as fluorescence marker. Firstly, a water-soluble fluorescent probe carrier was prepared by combining the BODIPY derivatives with poly (carboxybetaine methacrylate) (p-CBMA). Two oil-in-water carborane polymers were self-assembled in organic solvents by means of dual ion hydrogen bonding. The ultraviolet and fluorescence spectra were measured with different organic solvents, and the spectra ranged from 531 to 555 nm. The dynamic self-assembly effect was tested by TEM, and the internal microscopic phenomena of the water-soluble polymer were further observed. It was confirmed that two kinds of BODIPY zwitterionic polymers were firmly encase the fat-soluble carborane, forming an oval shape. Carboranes are water-soluble, can achieve biocompatible expression, and can visualize the degree of aggregation in the targeted cells through its own fluorescence effect. Subsequent imaging of the cells showed that both polymers entered the targeted cells.     

MoS2/SnS异质结太阳能电池的模拟研究

硫化亚锡(SnS)是一种Ⅳ-Ⅵ族层状化合物半导体材料,其禁带宽度与太阳能电池最佳带隙1.5 eV非常接近,并且在可见光范围内光的吸收系数很大(α>10⁴ cm^-1),因此SnS是一种很有应用前景的材料。本文利用太阳能电池模拟软件wxAMPS模拟了MoS₂/SnS异质结太阳能电池,主要研究SnS吸收层的厚度、掺杂浓度和缺陷态等因素对太阳能电池性能的影响。研究发现:SnS吸收层最佳厚度为2 μm,最佳掺杂浓度为1.0×10¹⁵ cm^-3;同时高斯缺陷态浓度超过1.0×10¹⁵ cm^-3时,电池各项性能参数随着浓度的增加而减小,而带尾缺陷态超过1.0×10¹⁹ cm^-3·eV^-1时,电池性能才开始下降;其中界面缺陷态对太阳能电池影响比较严重,界面缺陷态浓度超过1.0×10¹² cm^-2时,开路电压、短路电流、填充因子和转换效率迅速下降。另外,通过模拟获得的转换效率高达24.87%,开路电压为0.88 V,短路电流为33.4 mA/cm²。由此可知,MoS₂/SnS异质结太阳能电池是一种很有发展潜力的光伏器件结构。     

Deciphering the Structure and Chemical Composition of Drug Nanocarriers: From Bulk Approaches to Individual Nanoparticle Characterization

Drug nanocarriers (NCs) with sizes usually below 200 nm are gaining increasing interest in the treatment of severe diseases such as cancer and infections. Characterization methods to investigate the morphology and physicochemical properties of multifunctional NCs are key in their optimization and in the study of their in vitro and in vivo fate. Whereas a variety of methods has been developed to characterize “bulk” NCs in suspension, the scope of this review is to describe the different approaches for the NC characterization on an individual basis, for which fewer techniques are available. The accent is put on methods devoid of labelling, which could lead to artefacts. For each characterization method, the principles and approaches to analyze the data are presented in an accessible manner. Aspects related to sample preparation to avoid artefacts are indicated, and emphasis is put on examples of applications. NC characterization on an individual basis allows gaining invaluable information in terms of quality control, on: i) NC localization and fate in biological samples; ii) NC morphology and crystallinity; iii) distribution of the NC components (drugs, shells), and iv) quantification of NCs’ chemical composition. The individual characterization approaches are expected to gain increasing interest in the near future.     

Hetaryl- and heteroarylvinyl-substituted nitrofurans identified as non-cytotoxic selective antitubercular agents

New (E)-5-[2-(5-nitrofuran-2-yl)vinyl]-1,2,4-oxadiazoles and 5-(5-nitrofuran-2-yl)-1,2,4-oxadiazoles were synthesized via the base-promoted condensation of nitrofuran-containing acyl chlorides with amidoximes. Testing these compounds against Gram-negative E. coli, Gram-positive B. subtilis and S. aureus as well as M. tuberculosis HRv37 strain revealed three compounds being selectively antimycobacterial. None of these compounds displayed any cytotoxicity towards human pancreatic epithelioid carcinoma cell line, PANC-1.     

染料敏化太阳能电池载流子传输的数值模拟

由于在染料敏化太阳能电池(dye-sensitized solar cell, DSSC)中存在染料弛豫、半导体薄膜中电子与氧化态染料分子发生反应和电子在电解质中与氧化态离子复合等不利反应,利用一个更完善的DSSC载流子传输模型对电池的光电性能进行模拟就显得非常重要。为此,本文基于由多重俘获理论建立的DSSC中的包括电子、染料阳离子、碘化物和三碘化物在内的载流子传输模型,数值模拟得到了不同TiO₂薄膜厚度、不同入射光强度与不同染料分子吸收系数下DSSC的J-V曲线。结果表明,随着TiO₂薄膜厚度的增加,太阳能电池的短路电流密度增大,开路电压减小,光电转换效率先增大后减小。当DSSC的TiO₂薄膜厚度为20 μm时,光电转换效率达到最大值7.41%,同时光电转换效率随入射光强度与染料分子吸收系数的增大均有一定程度提高,其中在吸收系数为4 500 cm^-1时,光电转换效率为6.73%。以上结果可以为改进DSSC的光电性能提供理论指导。